Anything about the software inside the hardware incl FW package for download...
#655 by filippo
July 3rd, 2012, 4:34 pm
Hi Color.line,

did you press the “menu” most right button on the amplifier front panel before inserting the smart card in the amplifier?
What kind of smart card are you using?

Thanks in advance,

Filippo
#1366 by somtecbh
November 29th, 2012, 11:17 pm
i have already upgrade my dsp boards to 5.3.2 version but my KAESOP boards do not upgrade to new version.
the version of my KAESOP boards continue 4.1.5d-1794 version.
Because this all times i open the Armonia version 2.3.1 i have a message i need upgrade firmware of my KAESOP boards or i can have latency of communication.
Please , eexplain how i can upgrade my KAESOP Boards.
Thank you
Marcelo
#1571 by somtecbh
November 7th, 2013, 3:15 pm
Hi Filippo and Terence
i have try to use my pre-set cards i have but all amplifiers i have ( around 40 pças ) do not accept that pre-set cards anymore !
it show a message "read error" on lcd display.
Please let me know what happen
the firmare i use is 5.3.2
i have try insert a old firmware 5.2 but it´s continue with the same message "reader error".

i have try using 5 pre-set cards i have.
Thank you,
Fernando
#1572 by somtecbh
November 7th, 2013, 3:22 pm
Hi Lawrence / Felippo

some amplifiers i have , have problems to show impedance meansure.
if i have 2.3 ohms they show 3.4 Ohms.
when i replace the amplifier and conect on the same speakers, it´s show the correct impedance.2.3 Ohms
Please let me know wich component i need verify or replace to do it manutence .
Thank you
Fernando
#1573 by luigichelli
November 8th, 2013, 6:37 pm
Hi Fernando,
do you have the "read error" on all the amplifiers?
did you flash the preset cards with the firmware updater software?
did those preset card work in the past and who provided them to you?
thanks a lot for you help!
Luigi.
#1617 by gzhubin
January 22nd, 2014, 6:38 am
filippo wrote:Hi weily,

I need to know more information about your problem:
- When do you get this error?
- Can you provide also a screenshot?
Anyway, please keep in mind that you have to provide to your amplifier an harware ID not equal to 0 (you can do this from the amplifier rear panel).
Moreover, if you are trying to create a firmware card for your amplifier, you need first to enter in a menu item from the amplifier local display.

Thanks in advance,

Filippo

How to change the Hardware ID in the rear panel?

I can't find anywhere to do this...

K3DSP with KAESOP
#1618 by luigichelli
January 22nd, 2014, 10:13 am
gzhubin wrote:How to change the Hardware ID in the rear panel?

I can't find anywhere to do this...

K3DSP with KAESOP


IF you have a K Series amp without the RS485 port you don't have to worry about the hardware id.
Cheers,
Luigi.
#1643 by gzhubin
February 8th, 2014, 4:33 am
[/quote]

IF you have a K Series amp without the RS485 port you don't have to worry about the hardware id.
Cheers,
Luigi.[/quote]

I'm try to update my firmware card and kaesop firmware .

But I have the same problem "overtime float 6".

My laptop's OS system is windows 8.1 x64 . I try it in windows 7 x64 and windows xp x86 too. Still doesn't work.

Firmware updater version:1.1.32

K3DSP with KAESOP version:5.2.2