This website uses cookies. By continuing you accept them.

DSP-D

DSP-D is a 2in/4out processing board based on Analog Devices SigmaDSP® platform and represents a highly flexible and powerful tool for both the designer and the end user, providing the former with all tools needed for tailoring the amplifier’s behavior through a precise 24bit @ 48kHz AD/DA...

DSP-4

DSP-4 is a 1 in/4 out advanced processing board specifically designed to provide powered products with all the features and processing power available on flagship KDSP Series rack amplifiers. It allows access to unique Armonía Pro Audio Suite functionalities such as LiveImpedance™ Measurement,...

KDSP board

State-of-the-art sound shaping under your fingertips! All K Series amplifiers can be factory-equipped with KDSP, or be retrofitted later. The KDSP board provides access to unique Armonía Pro Audio Suite™ functionalities such as LiveImpedance™ Measurement, TruePower™ Limiter, and Active...

KAESOP board

KAESOP plug-in board provides Powersoft K-Series amplifiers with a proprietary AESOP (AES Ethernet Simple Open Protocol) network dedicated to live applications where high quality audio, easy system configuration and reliability must be guaranteed. All K Series amplifiers can be factory-equipped...

BatFormer

The BatFormer™ is an optional plug-in output transformer, specifically developed for the Ottocanali 1204. BatFormers can be easily inserted through a dedicated lid in the amplifier chassis and allowing the conversion of any one, or all, of the 8 channels into a 70V or 100V constant voltage...

Step-Up Card

The Step-Up Card unlocks extra power capabilities on demand without the need to purchase new units. This step up system gives users the flexibility to grow into new sound system capabilities on demand without having to sell existing inventory and re-tool racks with entirely new amplifiers. Click...

Programming Boards

All D-Cell504 and DigiMod Series amp modules integrating a DSP can be programmed by using one of the DSP Programming Boards, available in LITE and PRO versions.Both of them act as an interface for controlling and programming the DSP on the amplifier by using SigmaStudio™ software on a PC,...

ProNet485

The new ProNet485 is a small device, hardly larger than a network adapter, specifically designed to make most Powersoft DSP-equipped modules Armonía compatible. It allows direct connection and communication between the DSP-equipped module and any PC running Windows operating systems and Armonía....

USB-RS485 adapter

The USB to RS485 provides direct connection and communication between the DSP-equipped module or amplifier and any PC running Windows operating systems and Armonía Pro Audio Suite™. It works in conjunction with the ProNet485 adapter.

DEVA Mounting Kits

Install DEVA and the Solar Panel anywhere thanks to the dedicated mounting kit solutions: Wall mounting kits KTWM0001 - DEVA  mounting kit for wall KTWMS001 - Solar Panel mounting kit for wall Pole mounting kits KT004085 - DEVA pole mounting kit for 40-85 mm pole diameter (1 1/2" - 3...

DSP + Interface

Select the DSP solution between the DSP-D, a simple board but with effective processing capabilities, or the DSP-4, simply the most advanced DSP solution on the market, provided with custom FIR filters, ethernet switch, GPS and 3-axis inclinometer. Each DSP comes fully equipped with a complete and...

Heatsink Medium

There are two types of heatsink, namely "Medium" and "Large". The former is compatible with the following DigiMod modules: 2004PFC2, 2000HV, 1500, 1000 and 500.The “Medium” heatsink is realised, just like its bigger counterpart, as plain alumium plate which guarantees proper heat dissipation to...

Heatsink Large

There are three types of heatsink, namely "Large", "Medium" and "Small". The former is compatible with the following amp modules: DigiMod 3000PFC, DigiMod 3004PFC4 and IpalMod.The “Large” heatsink is realised, just like its smaller counterpart, as plain alumium plate which guarantees proper heat...

Heatsink Small

There are three types of heatsink namely "Small", "Medium" and "Large". The "Small" is compatible with LiteMod and LiteMod HV.The “Small” guarantees proper heat dissipation to the compatible amplifier. Moreover, the heatsink comes with already assembled in/out Powercons connectors, that ensure...
VAT Number: P.I. 04644200489 - REA FI 468275 - Capital stock: € 1.000.000 i.v.

© Powersoft S.p.A. All rights reserved

Credits ISO 9000