- Overview & Features
- Specifications
- Downloads
Small and Lightweight 2/4-Channel High Power Amplifier Module
The D-Cell504 is an incredible mix of power and technology you wouldn't expect in such a small and lightweight amplifier: with 2x350W available at 4Ω, bridgeable to have 700W on a single 8Ω load with astonishing sound clarity, the D-Cell504 has already proven to be a wonderful solution for a very wider range of applications, from small-mid power professional loudspeakers to studio monitors, home cinema systems, musical instruments, powered mixers and even hi-fi applications.
The D-Cell504 is made of two incredibly compact units (power supply and 2-channel output stage), each one measuring just 100x78x45mm, guaranteeing easy mechanical integration and the ability to fit almost any possible design.
Limited size doesn't mean limited capabilities: the D-Cell504 power supply can drive two 2-channel amp units, permitting multi-way configurations in a ridiculous amount of space. Both output channel pairs are bridgeable, so that you can drive 3-way systems as well as 2-way bi-amped or symmetrical loads with higher power even at higher impedance.
Compactness and flexibility are the keywords even when looking at the DSP solution for the D-Cell504: in fact, the output stage is also available with an integrated 2in/4out DSP on board, a powerful tool to shape the audio signal and to apply the dynamic processing needed to make the most of your speakers still keeping them safe.
Key features (see documentation for details):
The D-Cell504 is an incredible mix of power and technology you wouldn't expect in such a small and lightweight amplifier: with 2x350W available at 4Ω, bridgeable to have 700W on a single 8Ω load with astonishing sound clarity, the D-Cell504 has already proven to be a wonderful solution for a very wider range of applications, from small-mid power professional loudspeakers to studio monitors, home cinema systems, musical instruments, powered mixers and even hi-fi applications.
The D-Cell504 is made of two incredibly compact units (power supply and 2-channel output stage), each one measuring just 100x78x45mm, guaranteeing easy mechanical integration and the ability to fit almost any possible design.
Limited size doesn't mean limited capabilities: the D-Cell504 power supply can drive two 2-channel amp units, permitting multi-way configurations in a ridiculous amount of space. Both output channel pairs are bridgeable, so that you can drive 3-way systems as well as 2-way bi-amped or symmetrical loads with higher power even at higher impedance.
Compactness and flexibility are the keywords even when looking at the DSP solution for the D-Cell504: in fact, the output stage is also available with an integrated 2in/4out DSP on board, a powerful tool to shape the audio signal and to apply the dynamic processing needed to make the most of your speakers still keeping them safe.
Key features (see documentation for details):
- Small Footprint / Low Weight: 100 x 78 x 45 mm, 263g (Amplifier Unit) / 300g (Power Supply Unit)
- Comprehensive/smart protection features: thermal, overcurrent, high frequencies and non audio signals
- Clip and Permanent signal limiter
- Auxiliary output voltage (±12V regulated, 200mA max)
- Bypass line outputs for external active/passive filters
- Mute command
- Temperature controlled Fan output
- Remote Control & Networking with optional DSP board
- Fully integrate in Armonia, for complete monitoring and fine-tuning the whole system.
- Power Factor Correction (PFC): for worldwide operation and error proof connection to mains voltage
- Modularity: separate power supply and amplification stages for easy and flexible integration
- Multistage architecture: possibility of feeding two amplification stages with a single power supply unit for multi-channel applications
- Novel State of the Art Fixed Frequency PPM-PWM modulation: Unmatched audio performance from any perspective, intrinsic immunity to intermodulation artifacts in multi-channel applications
- Customizable Power Output: 350W + 350W @ 4Ω, 180W @ 8Ω + 350W @ 4Ω
- Compact size and EMI/safety certification: for quick and easy product development
- Very High efficiency/Low consumption
- High quality audio: fixed frequency modulation design for predictable high end performance
- Optional On Board DSP 2 In - 4 Out: 24 bit AD/DA conversion, 28X28 bit multiplier with 56 bit accumulator, full double precision processing. Sigma Studio ® based full set of filtering, equalization, dynamic processing – 4 presets storable.
- Auxiliary DSP processed outputs: for slaving other not DSP equipped units
- Load Monitoring: for transducer health diagnostic and safety regulation compliance
| GENERAL | |||||
|---|---|---|---|---|---|
| Output power per channel (@ 230Vac) | 4 Ω |
8 Ω |
8 Ω Bridged | 16 Ω Bridged | |
| EIAJ test, 1 kHz, 1% THD | 2 x 350 W | 2 x 190 W | 1 x 700 W | 1 x 380 W | |
| Power requirements AC | 100 - 250 V (±10%) | ||||
| Mains Frequency Range | DC - 80 Hz | ||||
| Start-up Voltage | 90 V AC (130 V DC) | ||||
| Efficency | >95% (starting from 1/8 of the maximum output power) | ||||
| Shutdown Voltage | 290 V | ||||
| Minimum Operational Voltage | 70 V | ||||
| Max Input Voltage | 265 V | ||||
| Consumption (1/8 max output power @ 8 Ω Bridged) | 0.6 A | ||||
| Thermal emission (1/8 power @ 4 Ω ) | 119.2 BTU/Hour | ||||
| Thermal emission (1/4 power @ 4 Ω ) | 184.4 BTU/Hour | ||||
| Max operating ambient temperature | 40°C | ||||
| Size power supply unit | 100x78x45 mm (3.937x3.07x1.77 in) | ||||
| Weight power supply unit | 300 g (660 Lbs) | ||||
| Size amplifier | 100x78x45 mm (3.937x3.07x1.77 in) | ||||
| Weight amplifier | 263 g (560 Lbs) | ||||
| AUDIO | |||||
|---|---|---|---|---|---|
| Input impedance | 10 kΩ Balanced to ground | ||||
| Input sensitivity @ 8 Ω | 0.94V / 1.70 dBu | ||||
| Gain | 32dB (voltage gain: x40) | ||||
| Frequency response | 3 Hz - 45 kHz (-3dB) for 1W @ 8 Ω | ||||
| S/N ratio | > 113 dB(A) (20 Hz - 20K Hz) | ||||
| Crosstalk separation | >70 dB @ 1 kHz | ||||
| Slew rate* | 30 V/µs @ 8 Ω. input filter bypassed | ||||
| Damping factor* | > 1000 @ 100 Hz | ||||
| THD+N | < 0,005 % from 0,1W to full power | ||||
| SMPTE IMD* | < 0,005% from 0,1W to full power | ||||
| DIM100 IMD* | < 0,001% from 0,1W to full power | ||||
| Output type | Unbalanced to ground | ||||
| Max Output Voltage (peak) | 53 V | ||||
| DSP+Networking Specifications (optional board) | |||||
|---|---|---|---|---|---|
| Connector | Simm connector 72 pins (DSP-C and DSP-4 compatible) | ||||
| Configurator | Configurable with sigma studio or predefined layout | ||||
| Remote control | Fully support into Powersoft Armonía™ pro audio control suite | ||||
* = Guaranteed by design
Powersoft reserves the right to change specifications without notice.
