• View topic - Newest Firmware v5.3.11 and Updater for K Series & Duecanali

Posted: **April 10th, 2016, 8:46 pm**

HI,
Where can I get a frimware card in USA?

Thanks.

Posted: **April 11th, 2016, 11:30 am**

You'll be contacted soon via email.
Cheers!!

Posted: **August 31st, 2016, 4:05 pm**

Hi,

Does anyone know what is latest firmware version for Outline T series (re-branded K) ?
I have 5.3.8.

br, Einars

Posted: **August 31st, 2016, 4:20 pm**

Hello

yes, the 5.3.11 is indeed the latest FW version for the amps you have as well.

Cheers

Posted: **September 1st, 2016, 3:13 pm**

Thanks for the info. Can I put this version right on top of 3.13.7 or do I need some intermediate version?

Einars

Posted: **September 1st, 2016, 4:10 pm**

Hello,

you should be able to do the upgrade to the latest version by using the card. Just download the files, follow the procedure to create your card and then do the upgrade.

Cheers

Posted: **November 17th, 2016, 6:03 pm**

Hello all,
I have a problem with the update AESOP.
After updating KFRNT, KCNTRL, KDSP to version 5.3.11 with the card, I began to update KAESOP through Firmware Updater software (screenshots attached). Everything goes well until the final message "Update ended. (...)" When I click ok, I turn off and turn on the amplifier and check the firmware version for KAESOP - is still 5.3.8D-661! The only thing that changes is the IP address to the default and mode from manual to automatic.
I tried several times and always the same.

I'm doing something wrong?

Posted: **November 17th, 2016, 6:58 pm**

Hmmm... this is quite strange.
Could you please try with a single amplifier connected to the pc with a direct cable.
No Switches, routers etc.... everything set in auto ip, armonia not running.
Could you also give us the serial number of the amp giving problems?
Thanks!

Posted: **November 18th, 2016, 11:36 am**

Hi Luigi,

I'll try to evening with a direct connection without a switch. As if it did not help then I am read serial number.

Thanks for your feedback.

Regards
SS

Posted: **November 20th, 2016, 12:21 am**

Hi Luigi,
I tried with a direct connection and auto IP but still no result :/
S/N of amp's: 072888 and 072889.

Regards
SS

Posted: **November 22nd, 2016, 12:23 pm**

Any ideas?

Posted: **November 22nd, 2016, 4:25 pm**

This issue might be related to those specific amplifiers only, replied on your email.
Cheers!

Newest Firmware v5.3.11 and Updater for K Series & Duecanali

Re: Newest Firmware v5.3.11 and Updater for K Series & Dueca

Re: Newest Firmware v5.3.11 and Updater for K Series & Dueca

Re: Newest Firmware v5.3.11 and Updater for K Series & Dueca

Re: Newest Firmware v5.3.11 and Updater for K Series & Dueca

Re: Newest Firmware v5.3.11 and Updater for K Series & Dueca

Re: Newest Firmware v5.3.11 and Updater for K Series & Dueca

Re: Newest Firmware v5.3.11 and Updater for K Series & Dueca

Re: Newest Firmware v5.3.11 and Updater for K Series & Dueca

Re: Newest Firmware v5.3.11 and Updater for K Series & Dueca

Re: Newest Firmware v5.3.11 and Updater for K Series & Dueca

Re: Newest Firmware v5.3.11 and Updater for K Series & Dueca

Re: Newest Firmware v5.3.11 and Updater for K Series & Dueca