Everything regarding the Armonía Beta testing
#489 by iaicam
September 7th, 2011, 1:18 pm
Hi All,

I may have missed something obvious here.

I have just installed the beta 2.3.0.... and opened an M Series amp in the work space.

I spotted in the over view that there is a preset store/import/export section. This section was not accessible however.

How would i go about storing a preset for an M-Series Amplifier both on a laptop and on board the unit?

Many Thanks in advance
#490 by apaolinelli
September 7th, 2011, 3:17 pm
Hi iaicam,

thanks for using Armonia 2.3.0 Beta.

First of all you have to know that the section you are talking about (overview->preset) is available only for online amplifiers.
This section is managed by an auto close expander that you could open by simply clicking on the “overview” bar (just under the amplifier tab).
You can pin it with the control on the right side of the bar.

Regarding the import/store/export issues:

- Export => from amplifier to a file.
- Import => from file to amplifier.
- Store => just on board.

All the operations are related to the current preset.